KZDL-8 type guy smart set sulfur analyzer uses advanced single-chip automatic control from the deviation of the measurement conditions caused by the correction can be compensated, high resolution. The test is completed directly to print out the results of an advanced instrument measuring sulfur content. Features: 1. The United States imported products and the latest single-chip automatic control, pump main wearing parts are imported, over a period of time to solve the problem of reducing gas stream, the measurement of the deviation of the environment can be compensated amended resolution high. 2. all-Chinese liquid crystal display, sample organizations to adopt electronic switches, higher reliability type. 3. flow furnace using PID control, automatically adjust the flow furnace size, and extended service life compared to conventional controllers silicon carbide tube three times. 4. automatically determine the titration end point, auto electrolysis, and will not appear through the electrolytic current. 5. sending samples using non-contact switch, stable and reliable performance. Built-in calendar always, with power protection. 6. Set the oven temperature and sweat to the amendment. Direct heard panel input adjustment, no need to open the machine. 7. The instrument can be stored inside 100 latest history, steel user information query. 8. Can be field-modified Chinese characters printed telephone user name, user name administration. If the input value of water, then automatically print the analysis group, sulfate group sulfur content and moisture level. 1 Name Character smart set sulfur analyzer 2 Model KZDL-8 3 test method constant current mode, the software Coulomb titration 4 sulfur measurement range of 0.01 to 40% in May to test the temperature of 1150 ℃ (coal) 920 ℃ (oil) 6 Heating time ≤30 7 minute analysis time about 4-8 minutes (automatically determine the titration end point may end early return) 8 sample weight ≤100mg (depending on the type and weight of the sample may be) 9 resolution 10 0.001% sulfur measurement accuracy according to the national standard GB / T214- 1996 requires 11 working power Ac220V ± 15% 50Hz